Doctoral Thesis, supervised by G.B. Olson

 

Publications of Gregory B. Olson

| Books | Journal Papers | Latest |

 

BOOKS

Editor:

1. Innovations in Ultrahigh-Strength Steel Technology, Proc. 34th Sagamore Army Research Conf., ed. G. B. Olson, M. Azrin, and E. S. Wright, (1990).

2. Martensite, ed. G. B. Olson and W. S. Owen, ASM International, Materials Park, OH (1992)

Chapter Author:

  1. "Transformation Plasticity and the Stability of Plastic Flow," G. B. Olson, in Deformation, Processing and Structure, Chapter 9, 1982 ASM Materials Science Seminar, ed. G. Krauss, ASM (1984) pp. 391-424.
  2. "Principles of Martensitic Transformations," G. B. Olson and M. Cohen, in Frontiers in Materials Technologies, Chapter 2, ed. M. A. Meyers and O. T. Inal, Elsevier: Amsterdam (1985) pp. 43-87.
  3. "Mechanically-Induced Phase Transformations in Alloys," G. B. Olson, Encyclopedia of Mat. Sci. and Eng., Ed. M. B. Bever (1986) Pergamon Press, NY pp. 2929-32.
  4. "Dislocation Theory of Martensitic Transformations," G. B. Olson and M. Cohen, in Dislocations in Solids Vol. 7, Chapter 37, ed. F. R. N. Nabarro, North-Holland: Amsterdam (1986) pp. 295-407.
  5. "Introduction: Martensite in Perspective," G. B. Olson, in Martensite, eds. G. B. Olson and W. S. Owen, ASM International, Materials Park, OH (1992) pp. 1-10.
  6. "Martensitic Nucleation," G. B. Olson and A. L. Roitburd, Martensite, eds. G. B. Olson and W. S. Owen, ASM International, Materials Park, OH, (1992) pp. 149-174.
  7. "Mechanically Induced Phase Transformations in Alloys: An Update," G. B. Olson, Encyclopedia of Materials Science and Engineering, Supp. Vol. 3, Pergamon Press (1993) pp. 1786-1789.
  8. "Systems Design of Materials," G. B. Olson, Encyclopedia of Materials Science and Engineering, Pergamon (1993) pp. 2041-2045.
  9. "Displacive Transformations," G. B. Olson and M. Grujicic, in Kinetics of Phase Transformations, eds. M. J. Aziz, A. L. Greer and F. Spaepen, in preparation.
  10. "The Basics," G. B. Olson and M. Grujicic, in Kinetics of Phase Transformations, eds. M. J. Aziz, A. L. Greer and F. Spaepen, in preparation.
  11. “Effects of Stress and Deformation on Martensitic Formation,” G. B. Olson, Encyclopedia of Materials: Science and Technology, ed. H. Aaronson, Elsevier (2002) pp. 2381-2384.
  12. "Designing a New Material World," G. B. Olson, Science Pathways of Discovery, ed. I Amato, New York: John Wiley & Sons, 2002, ISBN 0-471-05660-X, pp. 91-108.

JOURNAL PAPERS

    1. "Superconducting Properties of BCC Alloys in the Nb-Ti-Mo System," B. Sadagopan, H. C. Gatos, and G. B. Olson, J. Appl. Phys. 41, No. 4 (1970) 1874.
    2. "A Mechanism for the Strain-Induced Nucleation of Martensitic Transformations," G. B. Olson and M. Cohen, J. Less-Common Metals 28, (1972) 107.
    3. "Kinetics of Strain-Induced Martensitic Nucleation," G. B. Olson and M. Cohen, Metall. Trans. 6A (1975) 791.
    4. "Thermoelastic Behavior in Martensitic Transformations," G. B. Olson and M. Cohen, Scripta Metall. 9 (1975) 1247.
    5. "Inhomogeneous Deformation and Strain-rate Effects in High-Strength TRIP Steels," M. Azrin, G. B. Olson, and R. A. Gagne, Mat. Sci. and Eng. 23 (1976) 33.
    6. "A General Mechanism of Martensitic Nucleation: Part I.  General Concepts and the FCC-HCP Transformation," G. B. Olson and M. Cohen, Metall. Trans. 7A (1976) 1897-1904.
    7. "A General Mechanism of Martensitic Nucleation: Part II.  FCC-BCC and Other Martensitic Transformations," G. B. Olson and M. Cohen, Metall. Trans. 7A (1976) 1905-1914.
    8. "A General Mechanism of Martensitic Nucleation: Part III.  Kinetics of MartensiticNucleation," G. B. Olson and M. Cohen, Metall. Trans. 7A (1976) 1915-1923.
    9. "Martensitic Nucleation and the Role of the Nucleating Defect," M. Cohen and G. B. Olson, New Aspects of Martensitic Transformations, Proc. First JIM International Symposium (JIMIS-1) Kobe, Japan. Suppl. Trans. JIM 17 (1976) 93.
    10. "The Stress Field of a Martensitic Particle and the Conditions for Thermoelastic Behavior," G. B. Olson and W. S. Owen, New Aspects of Martensitic Transformations, Proc. First JIM International Symposium (JIMIS-1) Kobe, Japan. Suppl. Trans. JIM 17 (1976) 105.
    11. "Austenite Stability and Tensile Properties of Warm-Extruded TRIP Steels," M. Azrin, G. B. Olson, and R. A. Gagne, Proc. Fourth North American Metalworking Research Conference, ed. T. Altan S.M.E., Dearborn, MI (1976) 25.
    12. "Reply to 'On the Equilibrium Temperature in Thermoelastic Martensitic Transformations'," G. B. Olson and M. Cohen, Scripta Metall. 11 (1977) 345.
    13. "Transformation Behavior of TRIP Steels," G. B. Olson and M. Azrin, Metall. Trans. A 9A (1978) 713.
    14. "Warm Extrusion of TRIP Steels: Process Control and Tensile Properties," M. Azrin, G. B. Olson and R. A. Gagne, Mat. Sci. and Eng. 40 (1979) 175.
    15. "Interphase Boundary Dislocations and the Concept of Coherency," G. B. Olson and M. Cohen, Acta Metall. 27 (1979) 1907.
    16. "On the Classification of Displacive Phase Transformations," M. Cohen, G. B. Olson, and P. C. Clapp, Proc. ICOMAT-79, Intl. Conf. on Mart. Transf., MIT 1979, p. 1.
    17. "Kinetics of Isothermal FCC-HCP Martensitic Nucleation," G. B. Olson and M. Cohen, Proc. ICOMAT-79, Intl. Conf. on Mart. Transf., MIT 1979, p. 310.
    18. "Soviet Progress in Thermomechanical Treatment of Metals," M. Azrin, G. B. Olson, E. B. Kula, and W. F. Marley Jr., J. Appl. Metalworking 2 (1980) 5-34.
    19. “Fatigue Strength of TRIP Steels," G. B. Olson, R. Chait, M. Azrin, R. A. Gagne, Metall. Trans. A 11A (1980) 1069.
    20. "Austenitic Grain Growth Characteristics in Rapidly Solidified Martensitic Steels," M. Suga, J. L. Goss, G. B. Olson, and J. B. Vander Sande, Proc. 2nd Intl. Conf. on Rapid Solidification Processing Principles and Technologies, Reston, VA (1980), p. 364.
    21. "A Perspective on Martensitic Nucleation," G. B. Olson and M. Cohen, Prefatory Chapter, Ann. Rev. Mat. Sci. 11 (1981) 1.
    22. "Fine Structure of Interphase Boundaries," G. B. Olson, Acta Metall. 29 (1981) 1475.
    23. "The Pseudoelastic Force Balance and Its Application to Fe-Be Alloys," M. L. Green, M. Cohen, and G. B. Olson. Mat. Sci. and Eng. 50 (1981) 109.
    24. "Adiabatic Deformation and Strain Localization," G. B. Olson, J. F. Mescall and M. Azrin, Keynote paper, Shock Waves and High Strain-Rate Phenomena in Metals: Concepts and Applications, ed. M. A. Meyers & L. E. Murr, Plenum: NY (1981) 221-247.
    25. "Stress-Assisted Isothermal Martensitic Transformation and Transformation Plasticity," G. B. Olson and M. Cohen, Proc. US/Japan Seminar on Mechanical Behavior of Metals and Alloys Associated with Displacive Phase Transformations, RPI, Troy, NY (1982) p. 7.
    26. "Theory of Martensitic Nucleation: A Current Assessment," G. B. Olson and M. Cohen, Proc. Intl. Conf. Solid-Solid Phase Transf., (Carnegie-Mellon Univ.) AIME (1982) 1145.
    27. "Dislocation Structure of Martensitic Interfaces," G. B. Olson and M. Cohen Proc. Intl. Conf. Solid-Solid Phase Transf., (Carnegie-Mellon Univ.) AIME (1982) 1209.
    28. "Strain Energy of a Martensitic Nucleus," H. C. Ling and G. B. Olson, Proc. Intl. Conf. Solid-Solid Phase Transf., (Carnegie-Mellon Univ.) AIME (1982) 1171.
    29. "Grain-Coarsening Resistance and the Stability of Second-Phase Dispersions in Rapidly Solidified Steels," G. B. Olson, H. C. Ling, J. S. Montgomery, J. B. Vander Sande, and M. Cohen, Proc. MRS Symp. Rapidly Solidified Amorphous and Crystalline Alloys, Elsevier (1982) 355.
    30. "Analysis of a Rapidly Solidified High-Phosphorus Austenitic Steel Containing an Amorphous Phase," T. F. Kelly, G. B. Olson, and J. B. Vander Sande, Proc, MRS Symp. Rapidly Solidified Amorphous and Crystalline Alloys, Elsevier (1982) 343.
    31. "Stress-Assisted Isothermal Martensitic Transformation: Application to TRIP Steels," G. B. Olson and M. Cohen, Metall. Trans. A 13A (1982) 1907.
    32. "Martensite and Life: Displacive Transformations as Biological Processes," G. B. Olson and H. Hartman, Proc. ICOMAT-82 J. de Physique 43 (1982) C4-855.
    33. "Classical and Non Classical Mechanisms of Martensitic Transformations," G. B. Olson and M. Cohen, Proc. ICOMAT-82 J. de Physique 43 (1982) C4-75.
    34. "Kinetics of Martensitic Interface Motion," M. Grujicic, G. B. Olson, and W. S. Owen, Proc. ICOMAT-82 J. de Physique 43 (1982) C4-173.
    35. "Constitutive Flow Relations During Strain-Induced Martensitic Transformation of Austenitic Steels," T. Narutani, G. B. Olson, and M. Cohen, Proc. ICOMAT-82 J. de Physique 43 (1982) C4-429.
    36. "Anisotropic Embrittlement in High Hardness ESR 4340 Steel Forgings," G. B. Olson, A. A. Anctil, T. S. De Sisto, and E. B. Kula, Metall. Trans. A 14A (1983) 1661.
    37. "Early Stages of Aging and Tempering of Ferrous Martensites," G. B. Olson and M. Cohen Metall. Trans. A 14A (1983) 1057.
    38. "Structure-Property Relationships in RSP Steels," G. B. Olson, M. Cohen, and G. J. Yurek, Proc. 3rd Conf. Rapid Solidification Processing: Principles & Technologies, ed. R. Mehrabian, NBS (1983) 171.
    39. "On the Lattice Correspondence of the  Displacive Transformation in Plutonium Alloys," G. B. Olson and P. H. Adler, Scripta Metall. 18 (1984) 401.
    40. "Interfacial Dislocations and Coherency," G. B. Olson, Surface Science 144 (1984) 302.
    41. "Plastic Shear Instability in 4340 Steel," G. B. Olson, M. Azrin, and N. Tsangarakis, in Materials Behavior Under High Stress and Ultrahigh Loading Rates, Proc. 29th Sagamore Army Materials Research Conference, Part II (AMMRC MS 84-2), ed. J. Mescall and V. Weiss (1984) 139.
    42. "Ageing of Fe-Ni-C Martensite," L. Chang, A. Cerezo, G. D. W. Smith, M. K. Miller, M. G. Burke, S. S. Brenner, K. A. Taylor, T. Abe, and G. B. Olson, Proc. 31st Field-Emission Symposium J. de Physique (1984) 1713.
    43. "On the Hierarchy of Interfacial Dislocation Structure," R. W. Balluffi and G. B. Olson, Metall. Trans. A 16A (1985) 529.
    44. "Mobility of Martensitic Interfaces," M. Grujicic, G. B. Olson, and W. S. Owen, Metall. Trans. A 16A (1985) 1713.
    45. "Mobility of the ' Martensitic Interface in Cu-Al-Ni.  I. Experimental Measurements," M. Grujicic, G. B. Olson, and W. S. Owen, Metall. Trans. A 16A (1985) 1723.
    46. "Mobility of the ' Martensitic Interface in Cu-Al-Ni.  II. Model Calculations," M. Grujicic, G. B. Olson, and W. S. Owen, Metall. Trans. A 16A (1985) 1735.
    47. "Rapidly Solidified Ferrous Alloys," G. B. Olson and R. G. Bourdeau, Rapidly Solidified Crystalline Alloys, ed. S. K. Das, B. H. Kear, and C. M. Adam, TMS-AIME, Warrendale, PA (1985) 185.
    48. "Ageing and Tempering of Ferrous Martensites," L. Chang, G. D. W. Smith and G. B. Olson, Proc. 32nd Intl. Field Emission Symposium, J. de Physique 47 (1986) C2-265.
    49. "Kinematics of  and  Martensitic Transformation in Pu Alloys," P. H. Adler, G. B. Olson and D. S. Margolies, Acta Metall. 34 (1986) 2053.
    50. "Shear Instability Mechanisms in High-Hardness Steels," M. Azrin, J. G. Cowie, and G. B. Olson, Annals of the Israel Physical Society 8 (1986) 409.
    51. "Strain Hardening of Hadfield Manganese Steel," P. H. Adler, G. B. Olson, and W. S. Owen, Metall. Trans. A 17A, (1986) 1775.
    52. "Alloy Carbide Precipitation in a High Cobalt-Nickel Secondary Hardening Steel," J. A. Liddle, G. D. W. Smith, and G. B. Olson, Proc. 33rd Intl. Field-Emission Symposium, J. de Physique 47 (1986) C7-223.
    53. "Structure/Property Relationships in High-Strength Steels," G. B. Olson, Proc. 31st Sagamore Army Materials Research Conference, ed. J. W. McCauley and V. Weiss, Plenum, NY (1986) 109.
    54. "Martensitic Transformation as a Deformation Process," G. B. Olson and M. Cohen, Proc. Earl R. Parker Symposium on Structure/Property Relationships, ed. S. D. Antalovich, W. W. Gerberich, and R. O. Ritchie, TMS-AIME, Warrendale, PA (1986) 367.
    55. "Lattice Stability and the Mechanism of Martensitic Transformations," G. B. Olson, Proc. ICOMAT 86, Japan Institute of Metals (1986) pp. 25-34.
    56. "Crystallographic Considerations of the  Displacive Transformation in Plutonium Alloys," P. H. Adler and G. B. Olson, Proc. ICOMAT 86, Japan Institute of Metals (1986) pp. 1095-1099.
    57. "Interphase Kinematics and the Roles of Structure and Composition in Solid-State Transformations," G. B. Olson, Scripta Metall. 21 (1987) 1023.
    58. "Statistical Aspects of Martensitic Nucleation," G. B. Olson, K. Tsuzaki, and M. Cohen, Turnbull Symposium: Phase Transitions in Condensed Systems, ed. G. S. Cargill, F. Spaepen, and K. N. Tu, MRS, (1987) 129.
    59. "Nucleation During the Solidification of Atomized Droplets Catalyzed by Spherically-Shaped Oxide Particles," M. R. Libera, G. B. Olson and J. B. Vander Sande, Science and Technology of Rapidly Quenched Alloys, ed. M Tenhover, MRS (1987).
    60. "Coupled Diffusional and Displacive Transformations," G. B. Olson, H. K. D. H. Bhadeshia, and M. Cohen, Proc. Phase Transformations '87, ed. G. W. Lorimer, Institute of Metals, (1988) pp. 322-325.
    61. "Alloy Design Principles for RSP Steels," G. B. Olson, Proc. 4th Conf. Rapid Solidification Processing: Principles and Technologies, ed. R. Mehrabian and P. A. Parrish, Claitor's (1988) 82-98.
    62. "New Developments in Rapidly Solidified Iron-Base Materials," J. H. Moll, W. Stasko, A. T. Galbato, G. B. Olson, and R. Ray, Proc. 4th Conf. Rapid Solidification Processing: Principles and Technologies, ed. R. Mehrabian and P. A. Parrish, Claitor's (1988) 174-189.
    63. "Ferrite-M2C Coherent Phase Equilibrium in an AF1410 Ultrahigh-Strength Steel," M. Grujicic and G. B. Olson, CALPHAD 12 #4 (1988) 403-412.
    64. "Thermodynamics and Kinetics of  Martensitic Transformation in Plutonium Alloys," P. H. Adler and G. B. Olson, Metall. Trans. 19A (1988) 2705-11.
    65. "M2C Carbide Precipitation in AF1410 Steel," G. M. Carinci, M. G. Hetherington, and G. B. Olson, Journal de Physique 49, (1988), C6-311.
    66. "Transformation Plasticity of Retained Austenite in Stage I Tempered Martensitic Steels," G. N. Haidemenopoulos, G. B. Olson, M. Cohen, and K. Tsuzaki, Scripta Metall. 23 (1989) 207-211.
    67. "Coupled Diffusional/Displacive Transformations," G. B. Olson, H. K. D. H. Bhadeshia, and M. Cohen, Acta. Metall. 37, (1989) 381-389.
    68. "Spinodal Decomposition During Aging of Fe-Ni-C Martensites," K. A. Taylor, L. Chang, G. B. Olson, G. D. W. Smith, M. Cohen, and J. B. Vander Sande, Metall. Trans. 20A (1989) 2717-2737.
    69. "{011} Twinning in Fe-Ni-C Martensites," K. A. Taylor, G. B. Olson, M. Cohen, and J. B. Vander Sande, Metall. Trans. 20A (1989) 2739-2747.
    70. "Carbide Precipitation During Stage I Tempering of Fe-Ni-C Martensites," K. A. Taylor, G. B. Olson, M. Cohen, and J. B. Vander Sande, Metall. Trans. 20A (1989) 2749-2765.
    71. "Thermally Activated Grain Boundary Motion Through a Dispersion of Particles," M. J. Gore, M. Grujicic, G. B. Olson, and M. Cohen, Acta. Metall. 37 (1989) 2849-2854.
    72. "Transformation Microyielding of Retained Austenite," G. N. Haidemenopoulos, M. Grujicic, G. B. Olson, and M. Cohen, Acta. Metall. 37 (1989) 1677-1682.
    73. "Microvoid Formation during Shear Deformation of Ultrahigh Strength Steels," J. G. Cowie, M. Azrin, and G. B. Olson, Metall. Trans. A 2A (1989) 143-153.
    74. "On the Optimization of Precipitated Austenite for Transformation Toughening of Steels," G. N. Haidemenopoulos, M, Grujicic, G. B. Olson, and M. Cohen, CALPHAD 13 (1989) 215-233.
    75. "Energetics of BCC-FCC Lattice Deformation in Iron," G. L. Krasko and G. B. Olson, Phys. Rev. B, 40 (1989) 536-544.
    76. "Ferromagnetism and Crystal Lattice Stability of BCC and FCC Iron," G. L. Krasko and G. B. Olson, J. Appl. Phys., 67 No. 9 (1990) 4570-4572.
    77. "Energetics of BCC-FCC Lattice Deformation in Iron," G. L. Krasko and G. B. Olson, in Atomic Scale Calculations in Materials Science, ed. J. Tersoff, D. Vanderbilt, V. Vitek, MRS Symp. Proc. Vol. 141 (1989) p. 135.
    78. "New Steels By Design," G. B. Olson, J. Materials Education 11 (1989) pp. 515-528.
    79. "Science of Steel," G. B. Olson, in Innovations in Ultrahigh-Strength Steel Technology, ed. G. B. Olson, M. Azrin, and E. S. Wright, Sagamore Army Materials Research Conference Proceedings: 34th (1990) 3-66.
    80. "Kinematics of M2C Carbide Precipitation," J. S. Montgomery and G. B. Olson, in Innovations in Ultrahigh-Strength Steel Technology, ed. G. B. Olson, M. Azrin, and E. S. Wright, Sagamore Army Materials Research Conference Proceedings: 34th (1990) 147-178.
    81. "APFIM Study of Multicomponent M2C Carbide Precipitation," G. Carinci, J. A. Liddle, G. D. W. Smith, and G. B. Olson, in Innovations in Ultrahigh-Strength Steel Technology, ed. G. B. Olson, M. Azrin, and E. S. Wright, Sagamore Army Materials Research Conference Proceedings: 34th (1990) 179-208.
    82. "Microvoid Formation During Shear Deformation of UHS Steels," J. G. Cowie, M. Azrin, and G. B. Olson, in Innovations in Ultrahigh-Strength Steel Technology, ed. G. B. Olson, M. Azrin, and E. S. Wright, Sagamore Army Materials Research Conference Proceedings: 34th (1990) 357-381.
    83. "Grain Refining Dispersions and Properties in Ultrahigh-Strength Steels," M. J. Gore, G. B. Olson, and M. Cohen, in Innovations in Ultrahigh-Strength Steel Technology, ed. G. B. Olson, M. Azrin, and E. S. Wright, Sagamore Army Materials Research Conference Proceedings: 34th (1990) 425-441.
    84. "Heterogeneous Precipitation of Austenite for Stabilization," M. Grujicic, M. Buonanno, S. M. Allen, G. B. Olson, and M. Cohen, in Innovations in Ultrahigh-Strength Steel Technology, ed. G. B. Olson, M. Azrin, and E. S. Wright, Sagamore Army Materials Research Conference Proceedings: 34th (1990) 527-547.
    85. "Dispersed-Phase Transformation Toughening in UHS Steels," G. N. Haidemenopoulos, G. B. Olson, and M. Cohen, in Innovations in Ultrahigh-Strength Steel Technology, ed. G. B. Olson, M. Azrin, and E. S. Wright, Sagamore Army Materials Research Conference Proceedings: 34th (1990) 549-593.
    86. "Evaluation of Decohesion Mechanisms by LMTO-ASA Cohesive Energy Calculations," G. L. Krasko and G. B. Olson, in Innovations in Ultrahigh-Strength Steel Technology, ed. G. B. Olson, M. Azrin, and E. S. Wright, Sagamore Army Materials Research Conference Proceedings: 34th (1990) 677-692.
    87. "A Novel Hydrogen-Resistant UHS Steel," J. F. Watton, G. B. Olson, and M. Cohen, in Innovations in Ultrahigh-Strength Steel Technology, ed. G. B. Olson, M. Azrin, and E. S. Wright, Sagamore Army Materials Research Conference Proceedings: 34th (1990) 705-737.
    88. "Coupled Diffusional/Displacive Transformations: Part II.  Solute Trapping", G. B. Olson, H. K. D. H. Bhadeshia, and M. Cohen, Metall. Trans. 21 A (1990) pp. 805-809.
    89. "Transmission Electron Microscopy Studies of the Structure of Martensitic Interfaces in Cu-Zn: HRTEM," F-R. Chen and G. B. Olson, Proc. XIIth Intl. Conf. Electron Microscopy, (1990).
    90. "Transmission Electron Microscopy Studies of the Structure of Martensitic Interfaces in Cu-Zn: Diffraction Contrast," F-R. Chen and G. B. Olson, Proc. XIIth Intl. Conf. Electron Microscopy, (1990).
    91. "Crystallography of the  Phase Transformation in a Pu-Ga Alloy," T. G. Zocco, M. F. Stevens, P. H. Adler, R. I. Sheldon, and G. B. Olson, Acta Metall. Mater. (1990) pp. 2275-2282.
    92. "Reply to Discussion of 'Spinodal Decomposition During Aging of Fe-Ni-C Martensites' "G. B. Olson, K. A Taylor, and M. Cohen, Metall Trans. 21A (1990) 2083-2086.
    93. "The Effect of Boron, Carbon, Phosphorus, and Sulfur on Intergranular Cohesion in Iron," G. L. Krasko and G. B. Olson, SolidState Comm. 76 (1990) pp. 247-251.
    94. "Mechanisms of First-Order Lattice-Distortive Transformations," G. B. Olson, Proc. ICOMAT'89 Materials Science Forum Vols. 56-58 Trans. Tech: Zurich (1990) pp. 89-100.
    95. "Materials Design: An Undergraduate Course," G. B. Olson, Morris E. Fine Symposium, eds. P. K. Liaw, J. R. Weertman, H. L. Markus, and J. S. Santner, TMS-AIME Warrendale, PA (1991) pp. 41-48.
    96. "Heterogeneous Nucleation of Solidification in Atomized Liquid Metal Droplets," M. Libera, G. B. Olson, and J. B. Vander Sande, Materials Science and Engineering, A132 (1991) 107-118.
    97. "APFIM Study of Multi-Component M2C Carbide Precipitation in AF1410 Steel," G. B. Olson, T. J. Kinkus, and J. S. Montgomery, Surf. Sci. 246, (1991) 238.
    98. "Solute Distribution Around a Coherent Precipitate in a Multicomponent Alloy," K. C. King, P. W. Voorhees, and G. B. Olson, Metall. Trans. 22A (1991) pp. 2199-2210.
    99. "A Constitutive Model for Transformation Plasticity Accompanying Strain-Induced Martensitic Transformations in Metastable Austenitic Steels," R. G. Stringfellow, D. M. Parks, and G. B. Olson, Acta Metall., Vol. 40, No. 7 (1992) pp. 1703-1716.
    100. "Effect of H on the Electronic Structure of Iron," G. L. Krasko, R. J. Harrison and G. B. Olson, MRS Symp. Proc. Vol. 209 (1991) 238.
    101. "Effect of Hydrogen on the Electronic Structure of a Grain Boundary in Iron," G. L. Krasko and G. B. Olson, SolidState Comm., 79 (1991) pp. 113-117.
    102. "Elastic Energy of Coherent Precipitation at Dislocations in an Anisotropic Matrix," K. C. King, G. B. Olson, and T. Mura, in Modern Theory of Anisotropic Elasticity and Applications, eds. J. J. Wu, T. C. T. Ting, and D. M. Barnett, SIAM, Philadelphia PA, (1991) pp. 103-121.
    103. "On the Constitutive Relations for  and  Martensitic Transformation Plasticity in Plutonium Alloys, P. H. Adler, G. B. Olson, M. F. Stevens, and G. F. Gallegos, Acta Metall., Vol. 40, No. 5, 1992, pp. 1073-1082.
    104. "Microanalytical Evaluation of a Prototype Stainless Bearing Steel," T. J. Kinkus and G. B. Olson, Surface Science, Vol. 266 (1992) pp. 391-396.
    105. "On the Electronic Basis of the Phosphorus Intergranular Embrittlement of Iron," R. Wu, A. J. Freeman and G. B. Olson, J. Mater. Res. Vol. 7 No. 9 (1992), pp. 2403 - 2411.
    106. "Systems Design of Advanced Bearing Steels," T. A. Stephenson, C. E. Campbell and G. B. Olson, Advanced Earth-to-Orbit Propulsion Technology 1992, eds. R. J. Richmond and S. T. Wu, NASA Conference Publication 3174, Vol. 2, (1992) pp. 299-307.
    107. "Modulation Mechanism for First-Order Transformations with Nonconserved Order Parameters," A. Umantsev and G. B. Olson, Phys. Rev. A 46 (1992) pp. R6132-35.
    108. "Distributed-Activation Kinetics of Heterogeneous Martensitic Nucleation," M. Lin, G. B. Olson and M. Cohen, Metall. Trans. 23A (1992) pp. 2987-98.
    109. "Bainitic Stabilization of Austenite in Low Alloy Steels," M. L. Brandt and G. B. Olson Proc. Gilbert R. Speich Symposium: Fundamentals of Aging and Tempering in Bainitic and Martensitic Steel Products, eds. G. Krauss and P. E. Repas, ISS-AIME, Warrendale, PA, (1992) pp. 257-265.
    110. "M2C Carbide Precipitation in AF1410," J. S. Montgomery and G. B. Olson Proc. Gilbert R. Speich Symposium: Fundamentals of Aging and Tempering in Bainitic and Martensitic Steel Products, eds. G. Krauss and P. E. Repas, ISS-AIME, Warrendale, PA, (1992) pp. 177-214.
    111. "Phosphorus-Induced Relaxation in an Iron Grain Boundary: A Cluster Model Study," S. Tang, A. J. Freeman and G. B. Olson, Phys. Rev. B 47 (1993) pp. 2441-2445.
    112. "Homogeneous Martensitic Nucleation in Fe-Co Precipitates Formed in a Cu Matrix," M. Lin, G. B. Olson and M. Cohen, Acta Metall. Mater. 41 (1993) pp. 253-63.
    113. "Estimation of the Domain-Boundary Energy by Landau-Ginzburg Model for Cubic to Tetragonal Transformations," P. Hong and G. B. Olson, Solid-State Comm., Vol. 85 (1993) pp. 681-683.
    114. "Bainitic Stabilization of Austenite in Low Alloy Steels," M. L. Brandt and G. B. Olson, Iron and Steel Maker, May, 1993, ISS, Warrendale PA, pp. 55-60.
    115. "Effects of P and B Adsorbates on the Fe (111) Surface," R. Wu, A. J. Freeman and G. B. Olson, PRB Rapid Comm. 47 No. 11 (1993) pp. 6855-6858.
    116. "Impurity Gettering in Rapidly Solidified Advanced Steels," G. Ghosh and G. B. Olson, Proc. 51st Annual Mtg. Microscopy Society of America, G. W. Bailey and C. L Rieder, Eds., San Francisco Press, 1993.
    117. "Coherency Induced Morphological Instability in NiAl-Type Precipitate," G. Ghosh, G. B. Olson and M. E. Fine, Proc. 51st Annual Mtg. Microscopy Society of America, G. W. Bailey and C. L Rieder, Eds., San Francisco Press, 1993.
    118. "Ostwald Ripening in Multicomponent Alloys," A Umantsev and G. B. Olson, Scripta Metall. Vol. 29 (1993) pp. 1135-1140.
    119. "Phase Equilibria and Transformations in Adiabatic Systems," A. Umantsev and G. B. Olson, Phys. Rev. E 48 (1993) 4229-4249.
    120. "Solid Solution Strengthening and Kinetics of Martensitic Transformation in Fe-Base Alloys," G. Ghosh and G. B. Olson, Proc. ICOMAT-92, Intl. Conf. Martensitic Transformations, Monterey, CA, eds. C. M. Wayman and J. Perkins, Monterey Inst. Adv. Studies, Carmel, CA (1993) 353-358.
    121. "Homogeneous Martensitic Nucleation in Fe-Co Precipitates Formed in a Cu Matrix," M. Lin, G. B. Olson and M. Cohen, Proc. ICOMAT-92, Intl. Conf. Martensitic Transformations, Monterey, CA, eds. C. M. Wayman and J. Perkins, Monterey Inst. Adv. Studies, Carmel, CA (1993) 191-196.
    122. "Modulation Mechanism for Displacive Transformations," A. Umantsev and G. B. Olson, Proc. ICOMAT-92, Intl. Conf. Martensitic Transformations, Monterey, CA, eds. C. M. Wayman and J. Perkins, Monterey Inst. Adv. Studies, Carmel, CA (1993) 215-220.
    123. "A Phenomenological Model for Magnetically-Driven Lattice-Distortive Transformations in Fe-Pd Alloys," P. Hong and G. B. Olson, Proc. ICOMAT-92, Intl. Conf. Martensitic Transformations, Monterey, CA, eds. C. M. Wayman and J. Perkins, Monterey Inst. Adv. Studies, Carmel, CA (1993) , 161-166.
    124. "First Principles Determination of the Effects of Phosphorus and Boron on Iron Grain-Boundary Cohesion," R. Wu, A. J. Freeman and G. B. Olson, Science, July 15, 1994, 376-380.
    125. "Systems Design of High Performance Steels," C. J. Kuehmann, J. Cho, T. A. Stephenson, and G. B. Olson, Metallic Materials for Lightweight Applications (40th Sagamore Army Materials Research Conference), eds. E. B. Kula and M. G. H. Wells, U.S. Government Printing Office, Washington, DC, Lake George, NY (1994) 337-355.
    126. "The Nature of Phosphorus Embrittlement of the Fe Grain Boundary," R. Wu, A. J. Freeman and G. B. Olson, Phys. Rev. B 50 (1994) 75.
    127. "Magnetic Origin of the Lattice Instability of FePd Alloys," P. Hong and G. B. Olson, J. Mag. & Mag. Matls. 129 (1994) 191-199.
    128. "Local Density Studies of the Structure and Electronic Properties of B and S in an Fe Grain Boundary," S. Tang, A. J. Freeman and G. B. Olson, Phys. Rev. B 50 (1994) 1.
    129. "Kinetics of FCCBCC Heterogeneous Martensitic Nucleation, Part I: The Critical Driving Force for Athermal Nucleation," G. Ghosh and G. B. Olson, Acta Metall. Mater. 42 (1994) 3361-3370.
    130. "Kinetics of FCCBCC Heterogeneous Martensitic Nucleation, Part II: Thermal Activation," G. Ghosh and G. B. Olson, Acta Metall. Mater. 42 (1994) 3371-3379.
    131. "Kinetics of Thermoelastic Martensitic Transformation," G. B. Olson, and H. Ohtsuka, Proc. Intl. Symp. on Shape Memory Materials, Intl. Acad. Publishers, Beijing (1994) 17-23.
    132. "On the Nucleation Driving Force for Displacive Transformations in Steels," G. B. Olson, K. C. Hsieh, and H. K. D. H. Bhadeshia, Microstructures LCS '94, Iron and Steel Inst. of Japan, Tokyo (1994).
    133. "Transmission Electron Microscopy Studies of the Crystallography of B.C.C./18R Martensite in Fe-Mn-Al-C," W. B. Lee, F-R. Chen, S. K. Chen, G. B. Olson and C. M. Wan, Acta Metall. Mater. Vol. 43, No. 1 (1994) pp. 21-30.
    134. "Nonclassical Nucleation of Displacive Phase Transformations," Y. A. Chu, B. Moran, P. Hong and G. B. Olson, Proc. Intl. Conf. SolidSolid Phase Transform. Inorg. Min. (PTM '94) Pittsburgh, PA, July 17-22, 655-660.
    135. "Coherency Induced Morphological Evolution," G. Ghosh, G. B. Olson and M. E. Fine, Proc. Intl. Conf. SolidSolid Phase Transform. Inorg. Min. (PTM '94) Pittsburgh, PA, July 17-22, 611-616.
    136. "Phase Separation in Fe-Ni-Al and Fe-Ni-Al-Cr Alloys," G. Ghosh, G. B. Olson, T. J. Kinkus and M. E. Fine, Proc. Intl. Conf. SolidSolid Phase Transform. Inorg. Min. (PTM '94) Pittsburgh, PA, July 17-22, 359-364.
    137. Thermodynamics-based Alloy Design Criteria for Austenite Stabilization and Transformation Toughening in the Fe-Ni-Co System,” G.N. Haidemenopolous, M. Grujicic, G.B. Olson, M. Cohen, Journal of Alloys and Compounds 220 (1995) 142-147.
    138. "Classification of Displacive Transformations: What is a Martensitic Transformation?," J. W. Christian, G. B. Olson and Morris Cohen, Proc. ICOMAT 95, supplement to J. de Phys. III, Vol. 5 (1995) Coll. C8, 3-10.
    139. "Opportunities in Martensite Theory," G. B. Olson, Proc. ICOMAT 95, supplement to J. de Phys. III, Vol. 5 (1995) Coll. C8, 31-40.
    140. "Computer-Aided Systems Design of Advanced Steels," C. J. Kuehmann, G. B. Olson, Proc. International Symposium of Phase Transformations During the Thermal/Mechanical Processing of Steel - Honoring Professor Jack Kirkaldy, E. B. Hawbolt et al., eds., Metallurgical Society of the Canadian Institute of Mining, Metallurgy and Petroleum, Vancouver BC (1995) 345-356.
    141. "Transformation Plasticity and Toughening," G. B. Olson, J. de Phys. V, Colloque C1 (1996) C1-407.
    142. "Effects of Carbon on Fe Grain Boundary Cohesion: First Principles Determination," R. Wu, A. J. Freeman and G. B. Olson, Phys. Rev. B., Vol. 53, No. 11 (15 March 1996) pp. 7504-7509.
    143. "Homogeneous Nucleation of a Solid-Solid Dilatational Phase Transformation," B. Moran, Y. A. Chu and G. B. Olson, Int. J. Solids Structures Vol. 33, No. 13 (1996) pp. 1903-1919.
    144. "Solid-Solution Structure and the Weakly First-Order Displacive Transformation in Fe-Pd Alloys," J. J. Felten, T. J. Kinkus, A. C. E. Reid, J. B. Cohen and G. B. Olson, Metall. Trans. 28A, (1997) 527-536.
    145. "High Temperature Stability and Thermal Expansion Behavior of Molybdenum-Chromium M2C Carbides," C. A. Knepfler, K. T. Faber, J. Weertman, G. B. Olson, C. R. Hubbard, O. B. Cavin, N. Packen, J. Alloys & Compounds 248 (1997) pp. 139-142.
    146. "Nonthermoelastic and Thermoelastic Martensitic Transformation Behavior Characterized by Acoustic Emission in an Fe-Pt Alloy," H. Ohtsuka, K. Takashima and G. B. Olson, Mat. Res. Soc. Symp. Proc. Vol. 459 (1997) pp. 407-412.
    147. "Systems Design of Hierarchically Structured Materials: Smart Steels," G. B. Olson, Proc. Intl. Forum on Creation of Super Metallic Materials Consisting of Amorphous, Nanoscale and Mesoscopic Structures, R&D Institute of Metals and Composites for Future Industries (RIMCOF), Tokyo, Feb. 7, 1997. (1998)
    148. "Effects of Mn Additions on the P Embrittlement of the Fe Grain Boundary," L. Zhong, R. Wu, A. J. Freeman and G. B. Olson, Phys. Rev. B 55, No. 11 (1997) pp. 133-137.
    149. "Computational Design of Hierarchically Structured Materials," G. B. Olson, Science, Vol. 277, No. 5330 (1997) pp. 1237-1242.
    150. "Brains of Steel: Designing Materiallurgists," G. B. Olson, Adv. Mat. & Proc. Vol. 152, No. 1 (1997) pp. 72-79.
    151. "Effects of Interfacial Relaxation on The Magnetic Coupling of Mn/Fe (111)", L. Zhong, R. Wu, A. J. Freeman and G. B. Olson, J. Appl. Phys. 81 (1997) pp. 4479-4481.
    152. "Design of Thermoset Resins with Optimal Graded Structures," S. H. Carr, R. D'Oyen and G. B. Olson, Proc. Fourth Intl. Conf. on Composites Engineering, David Hui, Ed., International Community for Composites Engineering (1997) p.205.
    153. "Cement Hydration," C. M. Neubauer, J. Thomas, M. Garci, K Breneman, G. B. Olson, and H. M. Jennings, Proc. 10th Intl. Congress on the Chemistry of Cement (Gothenburg, Sweden, June 2-6, 1997), Amarkai AB and Congrex Göteborg AB: Sweden (1997).
    154. "Terminator 3: Biomimetic Self-Healing Alloy Composite," B. Files and G. B. Olson, SMST-97: Proc. 2nd Intl. Conf. Shape Memory & Superelastic Technologies, SMST, Santa Clara CA, 1997, pp. 281-286.
    155. "Simulation of Carburization in Secondary Hardening Steels," C. J. Kuehmann, J. P. Wise, C. E. Campbell and G. B. Olson, Heat Treating, Proc. 17th Conf., Sept. 15-17, 1997, Indianapolis IN, ASM Intl., Materials Park OH, 1997, pp. 313-319.
    156. "Systems Design of Hierarchically Structured Materials:  Advanced Steels," G. B. Olson, J. Computer-Aided Mat. Des. 4 (1997) pp. 143-156.
    157. "Effects of Impurities and Alloying Elements on Iron Grain Boundary Cohesion,” D. E. Ellis, X. Chen, and G. B. Olson, MRS Sympos. Proc. Vol. 475 (1997) pp. 499-506.
    158. "Effects of Alloying Elements on Iron Grain Boundary Cohesion," X. Chen, D. E. Ellis, G. B. Olson, MRS Sympos. Proc. Vol. 492 (1998) pp. 243-248.
    159. "Microsegregation Behavior During Solidification and Homogenization of AerMet 100® Steel," H. E. Lippard, C. E. Campbell, T. Bjorklind, U. Borggren, P. Kellgren, V. P. Dravid and G. B. Olson, Met. Trans B, 29B (1998) pp. 205-210.
    160. "Chemical Embrittlement of Iron Grain Boundaries: P and the P/Mo Couple," L. Sagert, G. B. Olson and D. E. Ellis, Philos. Mag. B, Vol. 77 (1998) pp. 871-889.
    161. "Dynamics of Martensitic Interfaces," M. Grujicic and G. B. Olson, Interface Sci. 6, 155 (1998) pp. 155-164.
    162. "Materials Design: Building a Better Martensite," G. B. Olson, Proc. Intl. Conf. Displacive Phase Transformations and Their Applications in Materials Engineering, TMS-AIME, 1998, pp. 15-26.
    163. "Materials Design: Weld Metals for Elevated Temperature Service," G. B. Olson and C. J. Kuehmann, Mathematical Modelling of Weld Phenomena 4, Proc. 4th Intl. Seminar on Numerical Analysis of Weldability, IOM Communications Ltd., London, 1998, pp. 290-301.
    164. "Gear Steels Designed by Computer," C. J. Kuehmann and G. B. Olson, Adv. Mat. & Proc., Vol. 153, No. 5 (1998) pp. 40-43.
    165. “Thermodynamic Modeling of the Pd-X (X = Ag, Co, Fe, Ni) Systems,” G. Ghosh, C. Kantner, and G. B. Olson, J. Phase Eq., 20, No. 3 (1999) pp. 295-305.
    166. "An Analytical Electron Microscopy Study of Paraequilibrium Cementite Precipitation in Ultra-High-Strength Steel," G. Ghosh, C. E. Campbell and G. B. Olson, Metall. Mater. Trans. A, Vol. 30A (1999) pp. 501-512.
    167. "Dislocations in Nonlinear Nonlocal Media: Martensitic Embryo Formation," A. C. E. Reid, G. B. Olson and B. Moran, Phase Transitions, Vol. 69 (1999) pp. 309-328.
    168. "Continuum Modeling of Strain-Induced Martensitic Transformation at Shear-Band Intersections," V. I. Levitas, A. V. Idesman and G. B Olson, Acta Mater., Vol. 47, No. 1 (1999) pp. 219-233.
    169. "New Directions in Martensite Theory," G. B. Olson, Proc. ICOMAT 98, Mat. Sci. & Eng. A273-275 (1999) pp. 11-20.
    170. "Martensitic Embryo Formation at Dislocations near Surfaces," A. C. E. Reid and G. B. Olson, Proc. ICOMAT 98, Mat. Sci. & Eng. A273-275 (1999) pp. 257-261.
    171. "X-ray Line Broadening Analysis of Coherent M2C Precipitation in Ni-Co Secondary Hardening Steels," Y. Nagataki, J. B. Cohen and G. B. Olson, Proc. Advanced Materials for the 21st Century: The Julia R. Weertman Symposium, MRS, 1999.
    172. "Engineering Design and Communication: The Case for Interdisciplinary Collaboration," P. Hirsch, B. Shwom, C. Yarnoff, J. Anderson, D. Kelso, G. B. Olson, and J. E. Colgate, Intl. J. Eng. Ed, Vol. 17, 4-5 (2000) pp. 342-348.
    173. "Designing a New Material World," G. B. Olson, Science Vol. 288, 12 May 2000, pp. 993-998.
    174. "Charge Transfer Mechanism of Hydrogen-Induced Intergranular Embrittlement of Iron," L. Zhong, A. J. Freeman, R. Wu and G. B. Olson, Phys. Rev. B, No. 21 (2000) pp. 938-941.
    175. “Thermodynamic Modeling of the Cr-Pd and Mo-Pd Systems,” G. Ghosh and G. B. Olson, J. Phase Eq., Vol. 21, No. 1 (2000) pp. 32-39.
    176. “Effect of Mo and Pd on the Grain-Boundary Cohesion of Fe,” W. T. Geng, A. J. Freeman, R. Wu, and G. B. Olson, Phys Rev. B 62, No. 10 (2000) pp. 6208-6214.
    177. "A Model for Non-Classical Nucleation of Solid-Solid Structural Phase Transformations," Y. A. Chu, B. Moran, A. C. E. Reid and G. B. Olson, Met. Mater. Trans. A 31A (2000) 1321.
    178. "Influence of Alloying Additions on Grain Boundary Cohesion of Transition Metals: First-Principles Determination and its Phenomenological Extension," W. T. Geng, A. J. Freeman, and G. B. Olson, Phys. Rev. B 63 (2001) 165415.
    179. Simulation of Paraequilibrium Growth in Multicomponent Systems,” G. Ghosh and G. B. Olson, Metall. Mater. Trans. A 32A (2001) pp. 455-467.
    180. "A Continuum Description of Dislocations in Elastically Nonlinear Media: Martensitic Embryo Formation," A. C. E. Reid and G. B. Olson, Mat. Sci. & Eng. A309-310 (2001) pp. 370-376.
    181. "Brains of Steel: Mind Melding with Materials," G. B. Olson, Intl. J. Eng. Ed. Vol. 17, 4-5 (2001) pp. 468-471.
    182. "Beyond Discovery: Design for a New Material World," G. B. Olson, CALPHAD, Vol. 25, No. 2 (2001) pp. 175-190.
    183. "Systems Design of High Performance Stainless Steels:  I. Conceptual Design," C. E. Campbell and G. B. Olson, J. Computer-Aided Mat. Des. 7 (2001) pp. 145-170.
    184. "Systems Design of High Performance Stainless Steels:  II. Prototype Characterization," C. E. Campbell and G. B. Olson, J. Computer-Aided Mat. Des. 7 (2001) pp. 171-194.
    185. "New Age of Design," G. B. Olson,  J. Computer-Aided Mat. Des. 7 (2001) pp. 143-144.
    186. "Computational Thermodynamics and the Kinetics of Martensitic Transformation," G. Ghosh and G. B. Olson, J. Phase Eq., Vol. 22, No. 3 (2001) pp. 199-207.
    187. "Precipitation of Paraequilibrium Cementite: Experiments, and Thermodynamic and Kinetic Modeling," G. Ghosh, G. B. Olson, Acta. Mater. 50 (2002) pp. 2099-2119.
    188. "The Isotropic Shear Modulus of Multicomponent Fe-base Solid Solutions," G. Ghosh and G. B. Olson, Acta Mater. 50 (2002) pp. 2655-2675.
    189. "Numerical Modelling of Martensitic Growth in an Elastoplastic Material," V. I. Levitas, A. V. Idesman, G. B. Olson, and E. Stein, Philos. Mag. A, Vol. 82, No. 3 (2002) pp. 429-462.
    190. "Phase Stability of the Hf-Nb System: From First-Principles to CALPHAD," G. Ghosh, A. van de Walle, M. Asta and G. B. Olson, CALPHAD, Vol. 26, No. 4 (2002) pp. 491-511.
    191. Nanometer-scale solute clustering in aluminum-nickel-ytterbium metallic glasses,” D. Isheim, D.N. Seidman, J.H. Perepezko, G.B. Olson, Materials Science & Engineering A353 (2003) 99-104.
    192. “An Introduction to computational nanomechanics and materials,” W.K. Liu, E.G. Karpov, S. Zhang, H.S. Park, Comput. Methods Appl. Mech. Engrg. 193 (2004) 1529-1578.
    193. "Precipitation of Heusler Phase (Ni2TiAl) from B2-TiNi in Ni-Ti-Al and Ni-Ti-Al-X (X=Hf, Zr) Alloys," J. Jung, G. Ghosh, D. Isheim and G. B. Olson, Met. Mater. Trans. A (2003) pp. 1221-1235.
    194. "Overlayer and Superlattice Studies of Metal/Ceramic Interfaces: Fe/TiC," T. Shishidou, J-H Lee, Y-J Zhao, A. J. Freeman and G. B. Olson, J. Appl. Phys., Vol. 93, No. 10 (2003) 6876-6878.
    195. "Phase Equilibria in Prototype Nb-Pd-Hf-Al Alloys," A. Misra, R. Bishop, G. Ghosh and G. B. Olson, Met. Mater. Trans. A, Vol. 34A (2003) 1771-1782.
    196. "A Comparative Study of Precipitation Behavior of Heusler Phase (Ni2TiAl) from B2-TiNi in Ni-Ti-Al and Ni-Ti-Al-X (X=Hf, Pd, Pt, Zr) Alloys," J. Jung, G. Ghosh, and G. B. Olson, Acta Mater. 51 (2003) 6341-6357.
    197. Characterization of the Microstructure and Phase Equilibria Calculations in Powder Metallurgy Superalloy IN100”, A.M. Wusatowska-Sarnek, G. Ghosh, G.B. Olson, M.J. Blackburn and M. Aindow, J.  Materials Research, vol. 18, (2003) pp. 2653-2663.
    198. The Kinetics of Lath Martensitic Transformation”, G. Ghosh and G.B. Olson , J. de Physique IV, vol. 112, (2003) pp. 139-142.
    199. "A Hierarchical Multi-Physics Model for Design of High Toughness Steels," S. Hao, B. Moran, W-K. Liu, and G. B. Olson, J. Computer-Aided Materials Design 10 (2): 2003, 99-142.
    200. "Transformation Toughening in Dispersed-Phase Systems," G. B. Olson and C. J. Kuehmann, Symposium on the Thermodynamics, Kinetics, Characterization and Modeling of: Austenite Formation and Decomposition; Chicago, IL; 9-12 November (2003) pp. 493-504.
    201. "Quest for Noburnium: 1300C Cyberalloy," G. B. Olson, A. J. Freeman, P. W. Voorhees, G. Ghosh, J. Perepezko, M. Eberhart, C. Woodward, International Symposium on Niobium for High Temperature Applications, ed. Y-W. Kim and T. Carneiro (Warrendale, PA, TMS, 2004) 113-122.
    202. "Multi-Scale Constitutive Model and Computational Framework for the Design of Ultra-High Strength, High Toughness Steels," S. Hao, W-K. Liu, B. Moran, F. Vernerey and G. B. Olson, Comput. Methods Appl. Mech. Engrg. 193 (2004) 1865-1908.
    203. "An Assessment of Interfacial Dissipation Effects at Reconstructive Ferrite-Austenite Interfaces," A. Saha, G. Ghosh and G. B. Olson, Acta Mater. 53 (2004) 141-149.
    204. Strong interface adhesion in Fe/TiC,” J.-H. Lee, T. Shishidou, Y.-J. Zhao, A. J. Freeman, and G. B. Olson, Philosophical Magazine, Vol. 85, No. 31 (2005) 3683-3697.
    205. “Comment on “Grain Boundary Decohesion by Impurity Segregation in a Nickel-Sulfur System,” W. -T. Geng, J.-S. Wang, G. B. Olson, Science, Vol. 309 (2005).
    206. Materials by Design,” G. B. Olson, Handbook of Materials Modeling (2005) 2667-2669.
    207. Phase stability of the intermetallic L21 Heusler alloys of A2(Hf1-xZrx)Al (where A=Pd and Pt) for an Nb-based high-temperature materials design,” M. Kim, A. J. Freeman, S. Kim, J. H. Perepezko, G. B. Olson, Applied Physics Letters, 87 (2005).
    208. Hydrogen-Promoted Grain Boundary Embrittlement and Vacancy Activity in Metals: Insights from Ab Initio Total Energy Calculatons,” W.-T. Geng, A. J. Freeman, G. B. Olson, Y. Tateyama, T. Ohno, Materials Transactions, Vol. 46, No. 4 (2005) 756-760.
    209. “IDEA: Formalizing the Foundation for an Engineering Design Education,” A. F. McKenna, J. E. Colgate, S. H. Carr, G. B. Olson, International Journal of Engineering Education, Feb., 2006.
    210. Exploring Adaptive Expertise as a Target for Engineering Design Education,” A. F. McKenna, J. E. Colgate, G. B. Olson, S. H. Carr, ASME 2006 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Proc IDETC/CIE 2006 pp.1-6.
    211. The Na—H system: from first-principles calculations to thermodynamic modeling,” C. Qiu, S. M. Opalka, G. B. Olson, D. L. Anton, Int. J. Mat. Res. 97 (2006) 845.
    212. Thermodynamic modeling of the sodium alanates and the Na-Al-H system,” C. Qiu, S. M. Opalka, G. B. Olson, D. L. Anton, Int. J. Mat. Res. 97 (2006) 1484-1494.
    213. Atomic Size Effect in Impurity Induced Grain Boundary Embrittlement,” W. -T. Geng, A. J. Freeman, G. B. Olson, Materials Transactions, Vol. 47, No. 8 (2006) 2113-2114.
    214. Morris Cohen: A memorial tribute,” G. B. Olson, Mat. Sci. & Eng. A 438-440 (2006) 2-11.
    215. Advances in Theory: Martensite by Design,” G. B. Olson, Mat. Sci. & Eng. A 438 (2006) 48-54.
    216. "3D Computational Modeling of Shear Dominated Ductile Failure of Steel," Vernerey F.J., McVeigh C., Liu W.K., Moran B., Tewari D., Parks D., Olson G., Journal of The Minerals, Metals and Materials Society, pp. 45-51, December 2006.
    217.  “Computer Simulations for the Prediction of Microstructure/Property Variation in Aeroturbine Disks,” H.-J. Jou, P. Voorhees and G.B. Olson, Superalloys 2004, 2004, 877-886.
    218. Integrated design of Nb-based superalloys: Ab initio calculations, computational thermodynamics and kinetics, and experimental results,” G . Ghosh , G . Olson, Acta Materialia, Volume 55 , Issue 10 , (2007) Pages 3281 – 3303.
    219. Computer-aided design of transformation toughened blast resistant naval hull steels: Part I,” A. Saha, G. B. Olson, J Computer-Aided Mater Des, Vol. 14, No. 2 (2007) 177-200.
    220. Prototype evaluation of transformation toughened blast resistant naval hull steels: Part II,” A. Saha, J. Jung, G. B. Olson, J Computer-Aided Mater Des, Vol. 14, No. 2 (2007) 201-233.
    221. Biomimetic Self-Healing Metals,” M. V. Manuel, G. B. Olson, Proc. 1st Intl. Conference on Self-Healing Materials, 2007.
    222. Materials integrity in Microsystems: a framework for a petascale predictive-science-based multiscale modeling and simulation system,” A.C. To, W.-K. Liu, G. B. Olson, T. Belytschko, W. Chen, M. S. Shephard, Y.-W. Chung, R. Ghanem, P.W. Voorhees, D. N. Seidman, C. Wolverton, J.S. Chen, B. Moran, A. J. Freeman, R. Tian, X. Luo, E. Lautenschlager, A. D. Challoner, Comput Mech,  2008.
    223. Computational Thermodynamics-Based Design of Nanodispersion-Strengthened Shape Memory Alloys,” M. Bender, G.B. Olson, SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, Nov 2008, 115-122.
    224. A Micromorphic Model for the Multiple Scale Failure of Heterogeneous Materials,” F. Vernerey, W.-K. Liu, B. Moran, G. B. Olson, Journal of the Mechanics and Physics of Solids, April 2008, Vol. 56, 1320-1347.
    225. Local-Electrode Atom-Probe Tomographic Investigation of Strengthening Precipitates in a Mg-7Zn-3Al Alloy at Peak Hardness,” S. Zhang, G. B. Olson, Magnesium Technology Symposium 2008, MAGNESIUM TECHNOLOGY 2008 , (2008) 113-116.
    226. Hierarchical Model for Coaching Technical Design Teams,” M. V. Manuel, A. F. McKenna, G. B. Olson, IJEE, Vol. 24, No. 2, (2008) pp. 260-265(6).
    227. Concurrent Design of Hierarchical Materials and Structures,” D. L. McDowell, G. B. Olson, Scientific Modeling and Simulation SMNS, July 2008, 1-34.
    228. Precipitation Model Validation in 3rd Generation Aeroturbine Disc Alloys,” G.B. Olson, H.-J. Jou, J. Jung, J.T. Sebastian, A. Misra, I. Locci and D. Hull, Superalloys 2008, TMS, Warrendale, PA, 923-932 (2008).
    229. Thermodynamic modeling of the Na–Al–Ti–H system and Ti dissolution in sodium alanates,” C. Qiu, S. M. Opalka, O. M. Løvvik, G. B. Olson, Computer Coupling of Phase Diagrams and Thermochemistry, Vol. 32, No. 4, (2008), 624-636.
    230. 3D modeling of subsurface fatigue crack nucleation potency of primary inclusions in heat treated and shot peened martensitic gear steels,” R. Prasannavenkatesan, J. Zhang, D. L. McDowell, G. B. Olson, H-J. Jou, International Journal of Fatigue, Vol. 31, No. 7, (2009), 1176–1189.
    231. Complexity science of multiscale materials via stochastic computations,” W-K. Liu, L. Siad, R. Tian, S. Lee, D. Lee, X. Yin, W. Chen, S. Chan, G. B. Olson, L-E. Lindgen, M. F. Horstemeyer, Y-S. Chang, J-B. Choi and Y. J. Kim, Int. J. Numer. Meth. Engng (2009).
    232. Computational Materials Design and Engineering,” C. J. Khuemann, G. B. Olson, Materials Science & Technology, vol 25, no. 4, 2009.
    233. Designing a Precipitation-Strengthened, Superelastic, TiNi-Based Alloy for Endovascular Stents,” M. Bender, G. B. Olson, ICOMAT ’08, June 2008, in press.

    top